View IRHQ7110_294869.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 93785A
RADIATION HARDENED POWER MOSFET SURFACE MOUNT (LCC-28)
Product Summary
Part Number Radiation Level IRHQ7110 100K Rads (Si) IRHQ3110 IRHQ4110 IRHQ8110 300K Rads (Si) 600K Rads (Si) 1000K Rads (Si)
TM
IRHQ7110 100V, QUAD N-CHANNEL
RAD-Hard HEXFET MOSFET TECHNOLOGY
TM (R)
RDS(on) 0.6 0.6 0.6 0.75
ID 3.0A 3.0A 3.0A 3.0A
LCC-28
International Rectifier's RAD-Hard technology provides high performance power MOSFETs for space applications. This technology has over a decade of proven performance and reliability in satellite applications. These devices have been characterized for both Total Dose and Single Event Effects (SEE). The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters.
HEXFET(R) MOSFET
Features:
n n n n n n n n n n
Single Event Effect (SEE) Hardened Low RDS(on) Low Total Gate Charge Proton Tolerant Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Package Surface Mount Light Weight
Absolute Maximum Ratings (Per Die)
Parameter
ID @ VGS = 12V, TC = 25C ID @ VGS = 12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Pckg. Mounting Surface Temp. Weight For footnotes refer to the last page 3.0 1.9 12 12 0.1 20 85 3.0 1.2 3.0 -55 to 150 300 (for 5s) 0.89 (Typical)
Pre-Irradiation
Units A
W
W/C
V mJ A mJ V/ns
o
C
g
www.irf.com
1
12/27/00
IRHQ7110
Pre-Irradiation
Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified) (Per Die)
Parameter
BVDSS Drain-to-Source Breakdown Voltage BVDSS/TJ Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current
Min
100 -- -- -- 2.0 1.4 -- -- -- -- -- -- -- -- -- -- -- --
Typ Max Units
-- 0.11 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6.1 -- -- 0.62 0.60 4.0 -- 25 250 100 -100 11 4.0 5.5 13 16 23 15 -- V V/C V S( ) A
Test Conditions
VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 12V, ID = 3.0A VGS = 12V, ID = 1.9A VDS = VGS, ID = 1.0mA VDS > 15V, IDS = 1.9A VDS= 80V, VGS=0V VDS = 80V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS = 12V, ID = 3.0A VDS = 50V VDD = 50V, ID = 3.0A, VGS = 12V, RG = 7.5
IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD
Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance
nA nC
ns
nH
Measured from the center of drain pad to center of source pad VGS = 0V, VDS = 25V f = 1.0MHz
C iss C oss C rss
Input Capacitance Output Capacitance Reverse Transfer Capacitance
-- -- --
270 110 23
-- -- --
pF
Source-Drain Diode Ratings and Characteristics (Per Die)
Parameter
IS ISM VSD t rr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time
Min Typ Max Units
-- -- -- -- -- -- -- -- -- -- 3.0 12 1.2 173 863
Test Conditions
A
V nS nC Tj = 25C, IS = 3.0A, VGS = 0V Tj = 25C, IF = 3.0A, di/dt 100A/s VDD 25V
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance (Per Die)
Parameter
RthJC Junction-to-Case
Min Typ Max Units
-- -- 10.4
C/W
Test Conditions
Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics
IRHQ7110
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation (Per Die)
Parameter
BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance (TO-39) Static Drain-to-Source On-State Resistance (LCC-28) Diode Forward Voltage
100K Rads(Si)1
300K to 1000K Rads (Si)2
Units V nA A V
Test Conditions
VGS = 0V, ID = 1.0mA VGS = VDS, ID = 1.0mA VGS = 20V VGS = -20 V VDS= 80V, VGS =0V VGS = 12V, ID = 1.9A VGS = 12V, ID = 1.9A VGS = 0V, IS = 3.0A
Min 100 2.0 -- -- -- -- -- --
Max -- 4.0 100 -100 25 0.556 0.60 1.2
Min 100 1.25 -- -- -- -- -- --
Max -- 4.5 100 -100 25 0.706 0.75 1.2
1. Part numbers IRHQ7110, IRHQ3110, IRHQ4110 2. Part number IRHQ8110
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area (Per Die)
Ion Cu Br I LET MeV/(mg/cm2)) 28.0 36.8 59.8 Energy (MeV) 285 305 343 VDS (V) Range (m) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V 43.0 100 100 100 100 70 39.0 100 80 70 50 -- 32.6 50 40 35 -- --
120 100 80 VDS 60 40 20 0 0 -5 -10 VGS -15 -20 -25
Cu Br I
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHQ7110
Pre-Irradiation
100
10
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
100
10
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
1
1
5.0V
20s PULSE WIDTH T = 150 C
J 1 10 100
0.1 0.1
20s PULSE WIDTH T = 25 C
J 1 10 100
0.1 0.1
VDS , Drain-to-Source Voltage (V)
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
100
3.0
R DS(on) , Drain-to-Source On Resistance (Normalized)
ID = 3.0A
I D , Drain-to-Source Current (A)
2.5
10
TJ = 25 C
2.0
1.5
1
TJ = 150 C
1.0
0.5
0.1 5 7 9
V DS = 50V 20s PULSE WIDTH 11 13 15
0.0 -60 -40 -20
VGS = 12V
0 20 40 60 80 100 120 140 160
VGS , Gate-to-Source Voltage (V)
TJ , Junction Temperature( C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
4
www.irf.com
Pre-Irradiation
IRHQ7110
500
400
VGS , Gate-to-Source Voltage (V)
VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd
20
ID = 3.0A 3.7A
16
VDS = 80V VDS = 50V VDS = 20V
C, Capacitance (pF)
300
Ciss
12
200
C oss
8
100
4
C rss
0 1 10 100
0 0 2 4 6
FOR TEST CIRCUIT SEE FIGURE 13
8 10 12 14
VDS , Drain-to-Source Voltage (V)
QG , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
100
100
ISD , Reverse Drain Current (A)
OPERATION IN THIS AREA LIMITED BY R
DS(on)
I D , Drain Current (A)
10
10 100us
TJ = 150 C
1ms
1 10ms
1
TJ = 25 C V GS = 0 V
0.6 0.8 1.0 1.2 1.4
0.1 0.4
0.1
TC = 25 C TJ = 150 C Single Pulse
1 10
100
1000
VSD ,Source-to-Drain Voltage (V)
VDS , Drain-to-Source Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
www.irf.com
5
IRHQ7110
Pre-Irradiation
3.0
V DS VGS RG
RD
2.5
D.U.T.
+
I D , Drain Current (A)
-V DD
2.0
VGS
1.5
Pulse Width 1 s Duty Factor 0.1 %
1.0
Fig 10a. Switching Time Test Circuit
VDS 90%
0.5
0.0 25 50 75 100 125 150
TC , Case Temperature ( C)
10% VGS
Fig 9. Maximum Drain Current Vs. Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
100
Thermal Response (Z thJC )
10 D = 0.50 0.20 1 0.10 0.05 0.02 0.01 0.1
SINGLE PULSE (THERMAL RESPONSE)
0.01 0.00001
Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.1 0.0001 0.001 0.01 1
P DM t1 t2
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHQ7110
200
EAS , Single Pulse Avalanche Energy (mJ)
1 5V
150
TOP BOTTOM ID 1.3A 1.9A 3.0A
VD S
L
D R IV E R
RG
D .U .T.
IA S
100
+ V - DD
A
VGS 20V
tp
0 .0 1
50
Fig 12a. Unclamped Inductive Test Circuit
0 25 50 75 100 125 150
V (B R )D S S tp
Starting TJ , Junction Temperature ( C)
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
IAS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
50K
QG
12V
.2F .3F
12 V
QGS VG QGD
VGS
3mA
D.U.T.
+ V - DS
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
www.irf.com
7
IRHQ7110
Pre-Irradiation
Footnotes:
Repetitive Rating; Pulse width limited by
maximum junction temperature. VDD = 25V, starting TJ = 25C, L= 18.7mH, Peak IL = 3.0A, VGS = 12V ISD 3.0A, di/dt 165A/s, VDD 100V, TJ 150C Pulse width 300 s; Duty Cycle 2%
Total Dose Irradiation with VGS Bias.
12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A Total Dose Irradiation with VDS Bias. 80 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A
Case Outline and Dimensions -- LCC-28
Q2
Q1
Q3
Q4
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 12/00
8
www.irf.com

▲Up To Search▲

Price & Availability of IRHQ7110

	To Download IRHQ7110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .